The LMX Superleggera Cooler Review – New Cooling King?

Page : 1 2 3 4ALL



Product Name: Danamics LMX Superleggera

RoHS Compliant: Yes

Dimensions: (LxHxD) 158.2mm x 170.5mm x 90mm (heatsink only)

Motherboard Clearance Height: 30mm

Fan Comparability: 2x 120x25mm

Weight: 1180g (heatsink only!)

Sockets Supported: (Intel) 775, 1156, 1366 & (AMD) AM2/AM2+/AM3

The Cooler

The cooler features a striking ‘fanbox’ that looks great! This makes the job of fitting 2 120x25mm fans in push/pull configuration a breeze. You simply side the fan down the gaps on either side and slot them into place with the provided clips. The mounting is nice and secure. Note – the cooler can accommodate 120x38mm fans. The clips will not fit to secure the fan in place, but the fan still remains in place once tipped on it’s side inside the case.

The fins are evenly spaced out and secure. Danamics fixed the previous issue whereby the top two or three fins were loose, but this has now been rectified. The cooler features a nice smooth, slightly convex base for great heat transfer.

The cooler features a thick wire extending from the top of the cooler down one side to slot into the PowerBooster 2 pump.

This wire then leads to the new and improved pump. Only a 4-pin molex from the PSU is needed to power it and fits into a 3.5 inch drive bay for compact use. This pump only consumes <1W. Note – Do not turn the PowerBooster on without it connected to the cooler!

Included in the well presented and packed box are either a full Intel or AMD mounting kit with full detailed installation manuals for each platform.

Danamics provides steel plates to be placed on top and fitted onto the top plastic mounting brackets. This is to provide extra mounting pressure as they are quite weighty. Danamics say this is optional.

A warning leaflet, a nice information booklet with a CD-ROM, & some TIM are also provided.

Be Sociable, Share!


Skip to toolbar